TR CU 010/2011 On safety of machinery and equipment

SERCONS offers certification services of TR CU 010/2011 “On safety of machinery and equipment”

EAC сertificate TR CU 010/2011

The EAC certification procedure begins by identifying equipment, defining the schema of certification, and collecting necessary documentation. The scheme is chosen depending on the type of procurement (series or batch) and approved by the certification center. Three relevant certification schemes for compliance with the requirements and technical regulation of TR CU 010/2011:

• 1C (series) – implies the selection of samples for laboratory testing, assessment of the manufacturer’s site production and further inspection control of certified equipment until the end of the conformity document validity;
• 3C (batch) – sampling for testing by an accredited laboratory;
• 9C (batch) – is limited by the assessment of documents submitted to the certification body.

EAC declaration TR CU 010/2011

The registration process of the TR CU 010/2011 declaration is similar to the registration of the EAC Certificate. The EAC declaration can be issued on the basis of the applicant’s evidential base if this is provided by the chosen scheme (1D and 2D) and in the accredited centers by other schemes (3D, 4D, 5D and 6D):

• recorded results of laboratory and bench tests;
• documents certifying the quality of main components and assemblies;
• documents certifying equipment compliance to safety requirements.

Cost and terms for registration of a TR CU 010/2011 Certificate and Declaration

With SERCONS you can count for the affordable cost of services, as well as on the prompt implementation of all necessary procedures.

The technical regulation TR CU 010/2011 “On safety of machinery and equipment” was prepared and adopted to unify the mandatory requirements and technical regulation for all life cycle processes (from design and manufacture to disposal) of machines or equipment put into circulation on the Eurasian Customs Union member states territory.

Advantages of having an EAC Certificate

1. Owners of the TR CU 010/2011 Certificate get the opportunity to freely supply, move and sell machinery and equipment on the territory of the Eurasian Customs Union member states.
2. Conformity is carried in the form of EAC certification and declaration. In the first case, the validity of the document can last from 1 to 5 years (for a batch with no time limit). The declaration is registered for a similar period: from 1 to 5 years.
3. The technical regulation of the Customs Union TR CU 010/2011 “On safety of machinery and equipment” covers by its action not only machines and equipment indicated in the list of declarations, but also those that are operated at HIFs.

Procedure of documents registration in compliance with TR CU 010/2011 requirements

Turning to SERCONS you will find a reliable partner who has been providing EAC certification services for over 25 years. We offer prompt, high-quality and affordable execution of documents in compliance with the requirements of TR CU 010/2011, which will allow you to avoid errors leading to its cancellation.

Differences of TR CU 004, TR CU 020 and TR CU 010 сertificates

For certain groups of products included in the unified list of Technical Regulations of Eurasian Customs Union, confirmation of compliance in the form of certification is mandatory. This fully applies to agricultural, low-voltage equipment and equipment operating under excessive pressure, as well as to devices whose continuing operation depends on the influence of external electromagnetic interference.

Groups of products covered by the TR CU 010/2011, TR CU 004/2011 and TR CU 020/2011. The difference between the EAC Certificates is in scope:

1. A permitting certification document TR CU 010/2011 is registered for such types of products as:
   • explosion-proof equipment, as well as those powered by drives (pneumatic, hydro) and voltage over 1000 V;
   • hoisting and road-building machines;
   • bicycles, cutters, milling tools, grinding wheels, screwdrivers;
   • tools (hand, battery or electric).
2. Registration of the TR CU 020 EAC Сertificate is mandatory for:
   • explosion-proof equipment operating voltages exceeding 1000 V;
   • weight-lifting and road construction transport;
   • tools (hand, battery or electric);
   • ACC (Automation and control cabinets), low-voltage switchboards.
3. Mandatory registration of TR CU 004/2011 EAC Сertificate is required for:
   • spare parts and components;
   • tools (hand, electric or battery);
   • ACC (Automation and control cabinets) and low-voltage complete devices cabinets (LVD).

List of products subject to TR CU 010/2011

List of technical regulation subjects to confirmation of compliance with the requirements of TR CU 010/2011 in the form of certification:

1. Woodworking machines for household use
2. The all-terrain vehicle, snowmobiles and trailers
3. Garage equipment for motor vehicles and trailers
4. Agricultural machines
5. Small-scale mechanization tools for gardening and forestry applications, including electric ones
6. Machines for livestock, poultry and feed production
7. Mechanized tools, including electric
8. Technological equipment for logging, timber exchanges and timber melting: gasoline-powered
   • saws
   • electric chain saws
9. Technological equipment for trade enterprises, public catering and food processing units
10. Equipment for overburden and cleaning operations:
    • shortwall combines; mechanized complexes
    • mechanical supports
11. Mining equipment:
    • combines for coal and rock
    • metal supports for preparatory workings
12. Equipment for shaft lifts and mine transport:
    • mine conveyors
    • mining winches
13. Equipment for drilling boreholes and wells, equipment for charging and driving blast wells:
    • pneumatic drills (drill hammers)
    • hammers
    • machines for drilling wells in the mining industry
    • drilling rigs
14. Ventilation and dust suppression equipment:
    • mine fans
    • means of dust collection and dust suppression
    • oxygen compressors
15. Lifting and transport equipment, lifting cranes

List of objects subject to confirmation of compliance with the requirements of TR CU 010/2011 in the form of EAC declaration

1. Turbines and gas-turbine installations
2. Heavy-duty cars
3. Crushers
4. Diesel generators
5. Devices for lifting operations
6. Conveyors
7. Industrial floor no-rails transport
8. Technological equipment for trade enterprises, public catering and food processing units
9. Chemical and oil and gas processing equipment
10. Equipment for processing polymer materials
11. Pumping equipment (pumps, aggregates and installations)
12. Cryogenic, compressor, refrigeration, autogenic, gas cleaning equipment:
    • air separation and rare gas installations
    • equipment for preparation and purification of gases and liquids
    • heat and mass transfer equipment of cryogenic systems and installations, compressors (driven by air and gas)
    • refrigeration units
13. Equipment for gas-flame processing of metals and metallization of products
14. Gas-cleaning and dust-collecting equipment
15. pulp-and-paper equipment
16. Papermaking equipment
17. Oilfield equipment, drilling and geological exploration
18. technological and for applying paint equipment, and varnish coatings equipment
19. Equipment for liquid ammonia
20. Equipment for preparation and purification of drinking water
21. Metalworking machines
22. Forging and pressing machines
23. Woodworking equipment (except household woodworking machines)
24. Technological equipment for foundry production
25. Equipment for welding and thermal spraying
26. Industrial tractors
27.  Autoloaders
28. Bicycles (except for children)
29. Machines for earthmoving, land reclamation, quarry development and maintenance
30. Road vehicles, equipment for preparing construction mixes
31. Construction equipment and machinery
32. Equipment for the construction materials industry
33. technological equipment for logging, timber exchanges and timber melting (except for gasoline-powered saws and electric chain saws)
34. Technological equipment for the peat industry
35. industrial laundry equipment
36. Equipment for dry cleaning and dyeing of clothing and household products
37. Machinery and equipment for public utilities
38. Industrial fans
39. Industrial air conditioners
40. Air heaters and air coolers
41. Technological equipment for light industry
42. Technological equipment for the textile industry
43. Technological Equipment for the production of chemical fibers, fiberglass and asbestos threads
44. Technological equipment for the food, meat and dairy and fish industries
45. Technological equipment for the flour-milling, feed and grain elevator industry
46. Technological equipment for trade enterprises, public catering and food processing units
47. Printing equipment
48. Technological equipment for the glass, porcelain, earthenware and cable industries
49. Heating boilers that run on liquid and solid fuel
50. Gas and combined burners (except for block ones), liquid fuel, built into equipment intended for use in technological processes at industrial enterprises
51. Water-heating and heating devices that run on liquid and solid fuel
52. Milling cutters:
    • cutters with polyhedral carbide plates
    • cutting and slotting mills made of high-speed steel
    • carbide cutters
53. Cutters:
    • lathe tools with brazed carbide inserts
    • a lathe with a multi-faceted carbide plates
54. Circular saws with hard-alloy plates for processing wood materials
55. Locksmith and assembly tools with insulating handles for work in electrical installations with a voltage of up to 1000 V
56. Mounted cutters:
    • wood-cutting mounted cutters with back-mounted teeth
    • shell-wood processing mills with blades of steel or carbide; cutters shaft-mounted cylindrical national teams
57. Tools made of natural and synthetic diamonds:
    • diamond grinding wheels
    • diamond cutting circles
58. Tools made of synthetic super hard materials based on boron nitride (Elbor tools):
    • grinding wheels
59. Industrial pipeline fittings
60. Abrasive tool, abrasive materials:
    • grinding wheels, including hand tools
    • cutting wheels; polishing wheels
    • petal grinding wheels
    • endless sanding belts
    • fiber grinding wheels

To get a free consultation on EAC certification of TR CU 010/2011 please contact our specialists of SERCONS certification body.

You can also order a callback or leave an online request.